This week will see the construction of the neck or neck of the guitar.
did the same mahogany (Mahogani) laminated with incense.
the photo is Jonnhy, future owner of the guitar, proving the convenience of the mast.
I left a block of mahogany, which then opened to the media. rectified once both sides assemble a laminate with a stick of incense and two plates so Guatambu achieve a particular aesthetic. although the laminate gives a very nice aesthetic detail, the main reason of it is giving us greater mast structure.
after a cut of 15 ° for the blade (head) and so finally we have the mast in the rough.
in this instance, we have both edges square, make the channel where anger later placed the tensor (soul). for this purpose used a Makita workpieces with a 4mm drill.
to the top of the head used a Guayubira cutting, remnant of the first Hawaiian guitar. also add two plates (black and white).
and gluing the top of your head ...
cue to use two blocks Mahogany 2 "of the same taco leftovers to use for the mast.
and is now carving, carving and sanding ...
Note:
This is one of the many ways to build an acoustic guitar. is very common to see that they are constructed in 2 parts: first the neck and the other the body. in this case chooses to build with the traditional English method, which is to manufacture the parts separately and go uniting all as a ROPME-heads, starting from the junction of the handle with the soundboard .
be until next week. Alex
0 comments:
Post a Comment