Acoustic Guitar Construction of an acoustic guitar - the assembly 2
everyone, here's the final part of the building and then in another post photos of the finished guitar.
Thursday, June 17, 2010
Ankylosing Spondylitis;orthosis
Gluing the fingerboard:
frets (the pitch was grinding, polishing and taken to the radius of 16 "above)
holes for the placement of the pins:
At this stage perform the final sanding of the instrument and then place the bridge. but in itself will be dressed just after polishing with shellac.
and now with the masked area of \u200b\u200bthe bridge begins luster.
Once the gloss, we are ready to place the bridge permanently.
In this instance, the bridge already registered, one is anxious to hear the first sounds of the instrument ...
but first we must make saddles, place the pins, mic, cords, etc.
and now if it is finally time to hear the first sounds ...
thank you very much to all who were following the posts and I hope you have enjoyed as I!
Sera until next time!
Alex Leibiusky
Subscribe to:
Posts (Atom)